.
.
MODEL NO. LS-T75
LOTO HOLDER – Plastic / Polypropylene
LS-T75 Scaffolding tag holder with specific "DO NOT USE" message
+ having provision of tag insertion Size : Length 329mm, width 100mm,
thickness Upper thin part 2.28mm, lower tag insertion part 6.3mm,
Circular cut diameter 64.3mm
• Material : Polyester Or Plastic
• Weight : 6.5gm
• Thickness : 0.4mm (± 10 %)
• Size : length 329mm X 100mm, Diameter of top 64.3mm
• Application: It can be tied up with simple /numbered cable ties or
directly tuck the padlock shackle inside the punched eye lid, and then
write message with the normal /re writable permanent marker pen.
• Advantage:
a. Weather and tear proof, oil resistant.
b. Re - writeable and reusable.
c. Main utilization of Tagout system is to communicate safety and lockout
information like Danger, Caution and Do not attempt to operate Or Out of
service any switch, valve, or other energy isolating device bearing a padlock.
d. Customize tags hence we can make the design / application specific display an
application specific messages in the preferred language like English, Hindi etc.
Single / dual / Numerous color combination
Content / Size can be modify as per requirement
WE CAN MAKE CUSTOMIZED TAGS AND HOLDERS ALSO AS YOUR CHOICE……..
Specific References
LOTO HOLDER – Plastic / Polypropylene
LS-T75 Scaffolding tag holder with specific "DO NOT USE" message
+ having provision of tag insertion Size : Length 329mm, width 100mm,
thickness Upper thin part 2.28mm, lower tag insertion part 6.3mm,
Circular cut diameter 64.3mm
• Material : Polyester Or Plastic
• Weight : 6.5gm
• Thickness : 0.4mm (± 10 %)
• Size : length 329mm X 100mm, Diameter of top 64.3mm
• Application: It can be tied up with simple /numbered cable ties or
directly tuck the padlock shackle inside the punched eye lid, and then
write message with the normal /re writable permanent marker pen.
Best Sellers
No products at this time.
