









LS-BR30 LARGE HANDLE CIRCUIT BREAKER LOCKOUT
Material : ABS + anti corrosive screw for industrial and harsh application.
Accepts shackle up to : 9mm
Size :
full length : 84.25mm (without back locking portion)
Rectangular slot (teeth part) : 77mm X 20.6mm
rectangular part outward size : 93.5mm X 48mm
Teeth : 13 number, thickness 3mm, edge to edge gap 5.5mm
Locking holes : Totally twelve holes at the upper round and should adjust and meet three holes at the lower so that three authorized person can lockout the particular device at a time, then tagout the along with the device for recognition purpose.
LS-BR30 LARGE HANDLE CIRCUIT BREAKER LOCKOUT
Material : ABS + anti corrosive screw for industrial and harsh application.
Accepts shackle up to : 9mm
Size :
full length : 84.25mm (without back locking portion)
Rectangular slot (teeth part) : 77mm X 20.6mm
rectangular part outward size : 93.5mm X 48mm
Teeth : 13 number, thickness 3mm, edge to edge gap 5.5mm
Locking holes : Totally twelve holes at the upper round and should adjust and meet three holes at the lower so that three authorized person can lockout the particular device at a time, then tagout the along with the device for recognition purpose.
Weight:
Normal Screw |
Foldable screw |
Round screw |
35gm |
40gm |
70gm |
Large handle circuit breaker lockout device require tool with normal screw / No extra tool needed in foldable screw / round back hence it can be quickly and easily installed.
Advantage:
It's special designed to lockout wide range of oversized three phase circuit breakers.
The available teeth in the device is used to grip the actuator piker, so that it can not slip out after lockout.
Item Code | Description | Weight |
LS-BR28 | Normal screw | 35gm |
LS-BR29 | Foldable screw | 40gm |
LS-BR30 | Round back for screw tightening | 70gm |
No products at this time.