.
.
MODEL No. LS-BA66
Material : Polypropylene
Available in four different sizes with /
without extension to lockout numerous ball valves.
Locking holes : 6 Numbers.
Accepts shackle maximum up to : 9mm
Size : Total Lenght - 150 mm upper part depth 62mm
lower part depth 75mm back height 75mm front height 25mm
Advantage:
1. This device is fully dielectric device that
is very efficient, inexpensive and safe.
2. Also highly resistant to solvent and other
chemical products, resist cracking, abrasion
and higher temperature changes.
3. This device is used to lockout the movement
of lever for ball valve either in open or
Material : Polypropylene
Available in four different sizes with /
without extension to lockout numerous ball valves.
Locking holes : 6 Numbers.
Accepts shackle maximum up to : 9mm
Size : Total Lenght - 150 mm upper part depth 62mm
lower part depth 75mm back height 75mm front height 25mm
Advantage:
1. This device is fully dielectric device that
is very efficient, inexpensive and safe.
2. Also highly resistant to solvent and other
chemical products, resist cracking, abrasion
and higher temperature changes.
3. This device is used to lockout the movement
of lever for ball valve either in open or
closed position, It can lockout the pipes
with big diameter range as well as small diameter range.
For installation place the cover on the top of valve
handle then fix and adjust the slider and padlock + tag it.
Data sheet
- Width x Height x Depth
- Ball valve lockout with closed back that fits on valve sizes 9.5mm 31.5mm (3/8" to 1¼” OR 0.37" to 1.25")
Specific References
Material : Polypropylene
Available in four different sizes with /
without extension to lockout numerous ball valves.
Locking holes : 6 Numbers.
Accepts shackle maximum up to : 9mm
Size : Total Lenght - 150 mm upper part depth 62mm
lower part depth 75mm back height 75mm front height 25mm
Advantage:
1. This device is fully dielectric device that
is very efficient, inexpensive and safe.
2. Also highly resistant to solvent and other
chemical products, resist cracking, abrasion
and higher temperature changes.
3. This device is used to lockout the movement
of lever for ball valve either in open or
Best Sellers
No products at this time.
